carcleanervacuum.com

1. Press the locking catch to open up the dust compartment
2. Remove the filter holder from the dust compartment by pressing the catch
3. Empty the dust compartment
4. Replace the filter holder and ensure that it sits properly
5. Insert the dust compartment
6. Use a cleaning strip or similar to clear the tubes and hose
7. It may also be possible to remove the obstruction in the hose by squeezing teh hose. Be careful however in case the obstruction is caused by glass or needles caught inside the hose
8. To avoid deterioration of the carpet/hard floor nozzle clean it as often as possible. The easiest way to clean it is by using the hose handle
9. Remove entangled threads by snipping them away with scissors. Use the hose handle to clean the nozzle

Most of vacuum cleaner stops automatically if a blockage occurs in the nozzle, tube, hose or the filter become blocked with dirt. In such cases, disconnect from the mains and allow the cleaner to cool for 30 minutes. Remove the blockage and/or clean the filter, and then restart the vacuum cleaner

Empty the dust compartment after each vacuuming or as necessary. For best result it is recommended that the dust compartment is emptied regularly

Useful tips :
To prevent dust from escaping when empty the dust compartment, hold a plastic bag securely around the dust compartment and empty the contents into the plastic bag. Wait 30 seconds for the dust to settle before removing and sealing the plastic bag. Clean the dust compartment if necessary


[ HOME ]